The Volla is a two-way, two-unit design with rear port, and uses our top G1 ribbon tweeter.

Midwoofer is our newest AC165/50C2C 6.5" driver, sandwich cone (non woven carbon fibre + cell 2mm + non-woven carbon fibre); copper short-circuit ring is on the core magnet pole and the diameter of the voice coil is 50mm. The crossover of the Volla is not only designed precisely but also adopts M-Cap Supreme series and MKP series capacitors from Raimund Mundorf and inner connective cable are Classic cables from Swedish SUPRA, and 4pcs special-made copper connectors are for bi-wiring use.

The design of the Volla cabinet not only fully considers the request of acoustic performance, but also reaches the perfect embodiment in aesthetics. The parabola shaped cabinet structure can reduce any resonance to the lowest level and also reduce the odds of standing waves inside of the cabinet, and it also looks pleasing to both the eye. The cabinet surface of Volla is finished by various rare hardwoods and high gloss PE paint, and it is burnished by hand for more than ten times, then is hand polished. The high quality finish not only makes Volla superior to others and also makes Volla exquisite beyond compare.

Volla has top-ranking design. It's sound performance is realistic and natural, and that is what most audiophiles strive for. Beautiful tone and abundant detail, clear arrangements and broad sound stage, pure and honest voice, excellent dynamics, gorgeous high frequency, mellow and plump mid frequency, deep and powerful low frequency, and reasonable price, makes Volla the first class bookshelf speaker.

Like all Aurum Cantus products, the Volla boasts:

VOLLA
REVIEWS
Click for

Hand polished by experienced craftsman using 18 layers of luxurious piano finish. Each speaker undergoes 35 hours of buffing to achieve its luxury car like shine.

Intricate crossover designs uses expensive Mundorf Supreme MKP capacitors and Supra Jenving internal wirings for optimal dynamics, warmth and low frequency control. 5 way gold plated mega binding posts for top rate connectivity.

Drivers of each pair are hand matched to 5% deviation of precise imaging.

Incorporates pure aluminum ribbon tweeters that are designed in Italy resulting to: reduced wall reflections, pinpoint accuracy, extremely quick transients, unmatched openness, clarity and transparency, accurate reproduction of up to 40Khz, and THD of less than 0.03% at 90dB.
Suggested combinations

SPECIFICATIONS
Design
Frequency Response
Sensitivity
Impedance
Power requirement
Tweeter
Midrange




Dimension (HWD)
Weight (net weight)

2-way 2 units
38Hz ~ 40kHz.
88dB/W/M.
8 ohm (minimum 6.4 ohm)
50-200W recommended.
G1, aluminum ribbon type,

AC165/50C2C, 6.5" (165mm), sandwich cone non-woven carbon fiber + cell 2mm + non-woven carbon fiber, long throw.
460 × 245 × 385mm
21Kg/pc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Xindak FS-1
800MK

 

860

 

 

 

SC-6LS